Categories
Price Range
Manufacturers
Themes
    Categories
    Home > Products > 021- Wireless > 13.56MHz RFID Card Reader PN532 NFC Module PN 532 Arduino PIC
    13.56MHz RFID Card Reader PN532 NFC Module PN 532 Arduino PIC
    enlarge

    13.56MHz RFID Card Reader PN532 NFC Module PN 532 Arduino PIC


    Rating: 0 out of 100 - based on 0 review(s) | Write Review |
    RM32.00  
    Item details
    SKU: 021-013

    Stock: Stock available

    Brand: 021- Wireless
      Share This   Add To Facebook   Add To MySpace   

    13.56MHz RFID Card Reader PN532 NFC Module PN 532 Arduino PIC

    Product description:
    + The ITEAD PN532 NFC module, as its name implies, is based on the PN532 chip for 13.56 MHz near field communication. The module is equipped with an onboard antenna so there is no external antenna coil. It is compatible with SPI, IIC, and UART interfaces for communication. With the NFC library supporting Arduino and the Raspberry Pi we provide to develop NFC-enabled products, it is convenient to use.

    Features :
    + The longest effective communication distance is 5 cm
    + Support SPI, IIC, UART interface switching.
    + Can be used for 13.56M contactless communication
    + Compatible with ISO14443 TYPE A and B standards

    Specification :
    + chip NXP PN532
    + Operating Voltage 3.3V
    + voltage 3.3 to 5.5V
    + Maximum supply current 150 mA
    + Operating current (standby mode) 100 mA
    + Operating current (write mode) 120 mA
    + Operating current (read mode) 120 mA
    + pointer PWR
    + interface Raspberry Pi's 20pins interface standard SPI interface,
    + Board size: length 79mm × width 48mm × height 11mm

    There are two slide switch options on the board:
    + MODE : SET0 , SET1
    + UART : L , L
    + SPI : L , H
    + IIC : H , L